SAML Single Sign On (SSO) Into Bamboo Using Onelogin

Download

Bamboo SAML app gives the ability to enable SAML Single Sign On for Bamboo Software. Bamboo Software is compatible with all SAML Identity Providers. Here we will go through a guide to configure SSO between Bamboo and Onelogin. By the end of this guide, Onelogin users should be able to login and register to Bamboo Software.

Pre-requisites

To configure Onelogin integration with Bamboo SAML Single Sign On/SSO, you need the following items:

  • Bamboo should be installed and configured (supported version Bamboo Server 5.13.1 - 6.10.4).
  • Bamboo Server is https enabled.
  • Admin credentials are set up in Bamboo .
  • Valid Bamboo Server Licence.

Download And Installation

  • Log into your Bamboo instance as an admin.
  • Navigate to the settings menu and Click Manage Apps.
  • Click Find new apps or Find new add-ons from the left-hand side of the page.
  • Locate Bamboo SAML Single Sign On/SSO via search.
  • Click Try free to begin a new trial or Buy now to purchase a license for Bamboo SAML Single Sign On/SSO.
  • Enter your information and click Generate license when redirected to MyAtlassian.
  • Click Apply license.
bamboo saml using adfs

Step 1: Setup OneLogin as Identity Provider

Follow the steps below to configure OneLogin as an Identity Provider

miniorange img  Configuring OneLogin as IdP

  • Go to https:// <your_domain>.onelogin.com and login into OneLogin.
  • Log into OneLogin as an Administrator and go to Apps Company Apps Add Apps from the Navbar.
    • Single Sign On into JIRA using Onelogin, Onelogin SSO Login-1
  • In the search box, type SAML Test Connector (Advanced) and click on the App to add it.
    • Single Sign On into JIRA using Onelogin, Onelogin SSO Login-2
  • Enter the display name and click Save.
  • In Info enter App Name and click on Next.
  • After saving, go to Configuration Tab and enter the following:
    • Single Sign On into JIRA using Onelogin, Onelogin SSO Login-3
    Audience Audience URI from Step1 of the plugin under Configure IDP Tab.
    Recipient Recipient URL from Step1 of the plugin under Configure IDP Tab.
    ACS (Consumer) URL Validator ACS (Assertion Consumer Service) URL from Step1 of the plugin under Configure IDP Tab.
    ACS (Consumer) URL ACS (Assertion Consumer Service) URLfrom Step1 of the plugin under Configure IDP Tab.
    Single Logout URL Enter Single Logout URL from the Identity Provider Settings tab of the module.

miniorange img  Assigning Groups/People

  • Go to SSO tab. Note down the URL/Endpoints. These will be required while configuring the plugin.
    • Single Sign On into JIRA using Onelogin, Onelogin SSO Login-4 Single Sign On into JIRA using Onelogin, Onelogin SSO Login-5

miniorange img  Import IDP Metadata

  • Select SAML metadata options from More Actions dropdown list.
  • Download this metadata or Copy the URL and provide it in plugin settings.
  • You can also copy the URL's from SSO tab
    • Single Sign On into JIRA using Onelogin, Onelogin SSO Login-6
  • Save all the Settings.

Step 2: Setup Bamboo as Service Provider

Configure Single Identity Provider Setup

Configuring Single IDP

With the information you have been given by your IDP team, you can configure IDP settings in 3 ways:

A. By Metadata URL

  • Click on Import from Metadata in Configure IDP tab
  • Select IDP: Import From Metadata URL
  • Enter IDP metadata URL: Enter your metadata URL
  • If your IDP changes certificates at intervals, you can select Refresh metadata periodically. Select 5 minutes for the best results.
  • Click Import

Bamboo SAML Single Sign On, SSO-1

B. By uploading Metadata XML file

  • Click on Import from Metadata in Configure IDP tab
  • Select IDP: Import from Metadata File
  • Upload metadata file
  • Click Import

Bamboo SAML Single Sign On, SSO-2

C. Manual Configuration

Go to Configure IDP tab and enter the following details

  • IDP Entity ID
  • Single Sign On URL
  • Single Logout URL
  • X.509 Certificate
Bamboo SAML Single Sign On, SSO-3

Configure Multiple Identity Provider(IdP) Setup

Configure New IDP

If you already have one IDP & you are looking to add Second IDP then you can do it by performing the following steps.

  • Navigate to Configure IDP tab.
  • Click on Add new IDP.
  • It will present a blank form & you can configure new IDP using steps from Single IdP Setup.
Bamboo SAML Single Sign On, SSO-20

Configure multiple IDPs

If you have configured more than two IDPs then it will show you the list of IDP that you have configured with Bamboo.

Click on Add new IdP button for adding new IDP on Bamboo. The steps for adding new IDP will remain the same.

Bamboo SAML Single Sign On, SSO-21
An operation that you can perform with List of IdPs page.

  • Add / delete Identity Provider.
  • Test Connection between bamboo & IdP by click on Test button for respective IDP.
  • Edit the IdP configuration by clicking on the Edit button.
  • You can allow an only specific set of users to access Bamboo by using Domain Mapping.

Single Sign-On with Multiple Identity Provider(IDP)

Select your IdP from the list. It will redirect you to selected IdP login page.

Bamboo SAML Single Sign On, SSO-22
Configure Domain Mapping

You can enable domain mapping using Use Domain Mapping option.
Once enable it, you need add domain name against each IDP.
After enabling Domain Mapping it allows SSO only for those users whose domain matches with the specified one.

Bamboo SAML Single Sign On, SSO-23

Single Sign-On using Domain mapping

Enter the user email address. It will check your domain name with the configured domain if it matches then it will redirect you to the respective Identity Provider Login page.

Bamboo SAML Single Sign On, SSOBamboo SAML Single Sign On, SSO-24
This is how the login screen would appear after enabling domain mapping.

Step 3: Setting up Bamboo user profile attributes

    We will be setting up user profile attributes for Bamboo. If your users are stored in a directory that is Read Only, please check Disable Attribute Mapping in User Profile tab and follow steps given in Matching a User.

    Bamboo SAML Single Sign On, SSO-14

    a. Finding correct attributes
  • Go to Configure IDP tab. Scroll down and click on Test Configuration.
  • You will see all the values returned by your IDP to Bamboo in a table. If you don't see value for First Name, Last Name, Email or Username, make the required settings in your IDP to return this information.
  • Once you see all the values in Test Configuration, keep the window open and go to User Profile tab.
    • b. Setting profile attributes
  • In this tab, fill the values by matching the name of the attribute. For instance, if the Attribute Name in the Test Configuration window is NameID, enter NameID against Username
  • Setting up both Username and Email is required if you want to let users register. If you want existing users to the only login, configure the attribute using which you will match the user in Bamboo.
    • c. Matching a User
    When the user logs into Bamboo, one of the user's data/attribute coming in from the IDP is used to search the user in Bamboo. This is used to detect the user in bamboo and log in the user to the same account.
  • Go to User Profile tab
  • Select Username or Email for Login/Search Bamboo user account by
  • Enter the attribute name from IDP which corresponds to Username or Email using Finding Correct Attributes

Step 4: Assigning groups to users

    We will be setting up user group attributes for Bamboo. If your users are stored in a directory that is Read Only, please check Disable Group Mapping in User Groups tab and skip to Setting default group.

    a. Setting default group
  • Select the users' Default Group in the tab User Groups. If no group is mapped, users are added by default to this group.
  • You can enable default groups for All Users or New Users using the option.Select None if you don't want to assign any default group to SSO users. Using the option Enable Default Groups for.
    • Bamboo SAML Single Sign On - SSO - Default group
    b. Finding Group Attribute
  • Just like we found Attribute Name for User Profile attributes, we find group attribute.
  • Go to Configure IDP tab. Scroll down and click on Test Configuration.
  • You will see all the values returned by your IDP to Bamboo in a table. If you don't see value with groups, make the required settings in your IDP to return group names.
  • Once you see all the values in Test Configuration, keep the window open and go to User Groups tab.
  • Enter the Attribute Name of group against Group Attribute.
  • Check Disable Group Mapping option if you don't want to update groups of existing users.

    • c. Group Mapping
    Group Mapping can be done in two ways:
  • Manual group mapping: If the names of groups in Bamboo are different than the corresponding groups in IDP, then you should use Manual group mapping.
  • On-The-Fly group mapping: If the names of groups in Bamboo and IDP are same, you should use On-The-Fly group mapping.

  • I. Manual Group Mapping
    • Check Restrict User Creation Based on Group Mapping option if you want new users to be created only if at least one of the user's IDP groups is mapped to a group in the application.
    • For mapping, first select a Bamboo group from the dropdown which lists all groups present in Bamboo and then enter the name of the IDP group to be mapped in the textbox beside
    • For example, if you want all users in 'dev' group in IDP to be added to bamboo-users, you will need to select bamboo-users from the dropdown and enter 'dev' against bamboo-users.
    • Use '+1' and '+10' buttons to add extra mapping fields.
    • Use '-' button next to each mapping to delete that mapping.
    Bamboo SAML Single Sign On - SSO - Manual group mapping
  • II. On-The Fly Group Mapping
    • Check Create New Groups option if you want new groups from IDP to be created if not found in Bamboo.
    • If the user is part of some group in Bamboo and that group is not present in the SAML response returned by IDP, then the user will be removed from that group in Bamboo.
    • If you don't want On-The-Fly group mapping to affect Bamboo groups which are managed locally then add those groups in Exclude Groups field.
    Bamboo SAML Single Sign On - SSO - On the fly group mapping

Step 5: SSO Settings

    The settings in SSO Settings tab define the user experience for Single Sign On.
    a. Sign In Settings
  • Set Enable SSO for Bamboo Server to allow SSO for Bamboo users.
  • Set button text for button on login page using Login Button Text
  • Set redirect URL after login using Relay State. Keep this empty for coming back to the same page user started from
  • Enable Auto-redirect to IDP if you want to allow users to login only using IDP. Enable backdoor for emergency

    • b. Custom Login Template
    Design your own login template that will be used to intitate SSO.

    Bamboo SAML Single Sign On, SSO-17
    c. Sign Out Settings
    Set Logout URL or Logout Template to redirect users after logout action.

    Bamboo SAML Single Sign On, SSO-18
    d. SSO Error Settings
    Set error template to redirect users to a custom error page instead of login page. Use this if you have Auto-redirect to IDP enabled.

    Bamboo SAML Single Sign On, SSO-19
    e. Advance SSO Settings
  • Allow Users to Change Password: Disable if you don't want user to chnage their local bamboo credential.
  • Remember me cokies: If enabled, user stays logged in until user explicitly logs out.
  • Validate IDP's SAML Response: Configure time difference(in minute) here In case Bamboo server time is not in sync with your IDP's time.

    • Bamboo SAML Single Sign On, SSO-20



If you are looking for anything which you cannot find, please drop us an email on info@xecurify.com