SAML Single Sign-On for WordPress using VMWare Identity Manager (vIDM) as IDP
Configure Single Sign-On(SSO) login into WordPress by authenticating users with VMWare Identity Manager (vIDM) using our WordPress(WP) SAML Single Sign-On(SSO) plugin. The WP SAML SSO plugin leverages the SAML 2.0 protocol to allow users to use their VMWare Identity Manager credentials and securely SSO login into WordPress. This step-by-step set up guide will help you configure VMWare Identity Manager (vIDM) as Identity Provider (IDP) and WordPress as Service Provider (SP) to achieve VMWare Identity Manager WordPress SSO.
You can visit our WordPress SSO plugin to know more about the other features we provide.
Pre-requisites : Download And Installation
To configure VMware Identity Manager as SAML IdP with WordPress, you will need to install the miniOrange WP SAML SP SSO plugin:
WordPress Single Sign On SSO login with Azure, Azure B2C, Okta, ADFS, Keycloak, Salesforce, Ping, Onelogin, Gsuite, Shibboleth & many SAML IdPs [24/7 SUPPORT]
Download Free Plugin
Full Featured TrialSteps to configure VMware Identity Manager Single Sign-On (SSO) Login into WordPress(WP)
1. Setup VMware Identity Manager as IdP (Identity Provider)
Follow the following steps to Configure VMware Identity Manager as IdP
Configure VMware Identity Manager as IdP
- In the miniOrange WordPress SAML SP SSO plugin, navigate to SP (Service Provider) Metadata tab. Here, you can find the SP metadata such as SP Entity ID and ACS (AssertionConsumerService) URL which are required to configure the VMware Identity Manager as IdP (Identity Provider).
- Login to VMware Identity Manager portal and navigate to Catalog > Web Apps.
- Click on Settings button.
- In the left tab, click on SAML Metadata and download the Identity Provider Metadata as well as Signing Certificate. Keep this file handy as it will be needed for later configuration of miniOrange WordPress SAML Single Sign-On (SSO) plugin.
- Navigate back to Catalog > Web Apps and click on New.
- Enter the name for your WordPress App and click on Next.
- In the Configuration tab, from the Authentication Type dropdown select the SAML 2.0.
- Select the URL/XML as Configuration type.
- Copy and paste the metadata downloaded from the miniOrange WordPress SAML SP SSO plugin into the Configuration page and proceed to the next page.
- Set the Access Policies to the default_access_policy_set. Then click on Next.
- Click on Save & Assign.
- Add the users and under the Deployment Type dropdown, select Automatic and click on Save.
- New Application will be added with the assignment of the selected users.
- You have successfully configured VMware Identity Manager as SAML IdP (Identity Provider) for achieving VMware Identity Manager SSO login into your WordPress (WP) site.
2. Configuring WordPress as SP (Service Provider)
- Free
- Standard
- Premium
In the WordPress SAML SSO plugin, go to the Service Provider Setup tab of the plugin. There are two ways to configure the WordPress SSO plugin:
A. By uploading IDP metadata:
- Click on Upload IDP metadata button.
- Enter the Identity Provider Name
- You can either upload a metadata file and click on Upload button or use a metadata URL and click on Fetch Metadata.
B.Manual Configuration:
- Provide the required settings (i.e. Identity Provider Name, IdP Entity ID or Issuer, SAML Login URL, X.509 Certificate) as provided by your Identity Provider and click on the Save button.
- Click on Test configuration to check the attributes and values sent by IDP.
Step 3: Attribute Mapping
- In the free plugin, only NameID is supported for Email and Username attributes of the WordPress user.
- When a user performs SSO, the NameID value sent by the IDP will get mapped to the email and username of the WordPress user.
Step 4: Role Mapping
- In the free plugin, you can choose a Default Role which will be assigned to all the non-admin users when they perform SSO.
- Go to Attribute/Role mapping tab and navigate to Role Mapping section.
- Select the Default Role and click on the Update button.
Step 5: SSO settings
- In the free plugin you can add a Single Sign-On button by enabling Add a Single Sign-On button on the WordPress Login Page toggle in Option 1.
- If your WordPress theme supports login widget, you can add a login widget to enable SP-Initiated SSO on your site.
- Navigate to Redirection and SSO links tab and follow the given steps given under Option 2: Use a Widget to add a login widget on your site.
In the WordPress SAML SSO plugin, go to the Service Provider Setup tab of the plugin. There are two ways to configure the WordPress SSO plugin:
A. By uploading IDP metadata:
- Click on Upload IDP metadata button.
- Enter the Identity Provider Name
- You can either upload a metadata file and click on Upload button or use a metadata URL and click on Fetch Metadata.
B.Manual Configuration:
- Provide the required settings (i.e. Identity Provider Name, IdP Entity ID or Issuer, SAML Login URL, X.509 Certificate) as provided by your Identity Provider and click on the Save button.
- Click on Test configuration to check the attributes and values sent by IDP.
Step 3: Attribute Mapping
- Attribute Mapping feature allows you to map the user attributes sent by the IDP during SSO to the user attributes at WordPress.
- In WordPress SAML plugin, go to Attribute/Role Mapping tab and fill up the following fields in Attribute Mapping section.
NOTE: If you click on Test Configuration button in Service Provider Setup tab and authenticate with your IDP, you can see a list of attributes sent by the IDP in the Attribute/Role mapping tab. This information can be used to provide the above mapping.
Step 4: Role Mapping
- Go to Attribute/Role mapping tab and navigate to Role Mapping section.
- Select the Default Role and click on the Save button.
In the standard plugin, you can choose a default role which will be assigned to all the non-admin users when they perform SSO.
Step 5: SSO settings
- Auto-Redirection from site: If this option is enabled, any unauthenticated user trying to access your site will get redirected to the IDP login page and after successful authentication, they will be redirected back to the same page on your site which they were trying to access.
- Go to Redirection and SSO Links tab of the plugin and navigate to Option 1: Auto - Redirection from site.
- Enable Redirect to IdP if user not logged in [PROTECT COMPLETE SITE]option.
- Auto-Redirection from WordPress Login: If this option is enabled, any unauthenticated user trying to access the default WordPress login page will get redirected to the IDP login page for authentication. After successful authentication, they will be redirected back to the WordPress site.
- Go to Redirection and SSO Links tab of the plugin and navigate to Option 2: Auto- Redirection from WordPress Login.
- Enable Redirect to IdP from WordPress Login Page option.
- SSO Links: You can add SSO links anywhere on your site using the Shortcode and Widget provided in Redirection and SSO Links tab > Option 3: SSO Links section of the plugin
In the Standard plugin you can enable SP-initiated SSO using the following options.
Steps:
Steps:
NOTE: Please enable the Backdoor login and note down the backdoor URL. This will allow you to access the WordPress login page in case you get locked out of the IDP.
In the WordPress SAML SSO plugin, go to the Service Provider Setup tab of the plugin. There are two ways to configure the WordPress SSO plugin:
A. By uploading IDP metadata:
- Click on Upload IDP metadata button.
- Enter the Identity Provider Name
- You can either upload a metadata file and click on Upload button or use a metadata URL and click on Fetch Metadata.
- In the Premium plugin, you can enable auto-sync for the metadata URL which will auto-update the plugin configuration as per the IDP metadata after a set interval of time
B.Manual Configuration:
- Provide the required settings (i.e. Identity Provider Name, IdP Entity ID or Issuer, SAML Login URL, X.509 Certificate) as provided by your Identity Provider and click on the Save button.
- Click on Test configuration to check the attributes and values sent by IDP.
- In the Premium Plugin, you can provide the SAML Logout URL to achieve Single Logout on your WordPress site.
Step 3: Attribute Mapping
- Attribute Mapping feature allows you to map the user attributes sent by the IDP during SSO to the user attributes at WordPress.
- In WordPress SAML plugin, go to Attribute/Role Mapping tab and fill up the following fields in Attribute Mapping section.
- Custom Attribute Mapping: This feature allows you to map any attribute sent by the IDP to the usermeta table of WordPress.
Step 4: Role Mapping
- From the Attribute Mapping section of the plugin, provide a mapping for the field named Group/Role. This attribute will contain the role related information sent by the IDP and will be used for Role Mapping.
- Navigate to role mapping section and provide the mappings for the highlighted roles.
- For example, If you want a user whose Group/Role attribute value is wp-editor to be assigned as an Editor in WordPress, just provide the mapping as wp-editor in the Editor field of Role Mapping section.
This feature allows you to assign and manage roles of the users when they perform SSO. Along with the default WordPress roles, this is compatible with any custom roles as well.
Step 5: SSO Settings
- Auto-Redirection from site: If this option is enabled, any unauthenticated user trying to access your site will get redirected to the IDP login page and after successful authentication they will be redirected back to the same page on your site which they were trying to access.
- Go to Redirection and SSO Links tab of the plugin and navigate to Option 1 : Auto-Redirection from site.
- Enable Redirect to IdP if user not logged in option.
- Auto-Redirection from WordPress Login: If this option is enabled, any unauthenticated user trying to access the default WordPress login page will get redirected to the IDP login page for authentication. After successful authentication, they will be redirected back to the WordPress site.
- Go to Redirection and SSO Links tab of the plugin and navigate to Option 2: Auto- Redirection from WordPress Login.
- Enable Redirect to IdP from WordPress Login Page option.
- Login Button: You can add a customized login button anywhere on your site or WordPress login page by navigating to Option 3: Login Button section of Redirection and SSO Links tab.
- SSO Links: You can add SSO links anywhere on your site using the Shortcode and Widget provided in Option 4: SSO Links section of Redirection and SSO Links tab.
In the Premium plugin you can enable SP-initiated SSO using the following options.
Steps:
Steps:
NOTE: Please enable the Backdoor login and note down the backdoor URL. This will allow you to access the WordPress login page in case you get locked out of the IDP login.
You have successfully configured WordPress (WP) as SAML SP for achieving VMware IDentity Manager SSO login into your WordPress (WP) Site.
In this guide, you have successfully integrated VMWare Identity Manager WordPress SAML Single Sign-On (SSO) login by configuring VMWare Identity Manager as IdP and WordPress (WP) as SP using WordPress SAML Single Sign On SSO plugin.This solution ensures that you are ready to roll out secure Single Sign-On(SSO) login into your WordPress (WP) site using VMWare Identity Manager (vIDM) login credentials within minutes.
Recommended Add-Ons
SCIM User Provisioning
Allows syncing user's creation, updation and deletion from your IDP to WordPress site
Know more →
Page and Post Restriction
Restricts WordPress pages and posts based on User Roles and User's Login Status
Know more →
Learndash Integrator
Maps SSO users to LearnDash groups as per the group attributes sent by your IDP
Know more →Additional Resources
- What is Single Sign-On (SSO) Login?
- What is SAML? How does SAML SSO work?
- What is VMware Identity Manager?
- Frequently Asked Questions (FAQs)
If you are looking for anything which you cannot find, please drop us an email on samlsupport@xecurify.com
Sign Up
Need Help? We are right here!
